#HORIZON TREADMILL LUBRICANT HOW TO#
#HORIZON TREADMILL LUBRICANT MANUAL#
#HORIZON TREADMILL LUBRICANT FREE#

The amount of silicone applied on the treadmill is also important. You should also lubricate your treadmill before long-term storage. It would help the machine to last longer and use efficiently. It is recommended to apply silicone spray every 3 months or 40 hours of use for the maximum performance of your treadmill. Dielectric Grease: This is a type of grease that is ideal for use on treadmills.PTFE Spray: This might not be a great option in terms of lubricating the treadmill.Teflon Spray: This is widely used in automobiles.White Lithium Grease: This is also a good lubricant.Automobile Grade Grease: This is highly rated standard grease used in automobiles.Vaseline: It works well in almost all situations as it is a universal lubricant.Cooking Oil: Any type of oil such as olive, canola, coconut.Recommended Treadmill Wax Powder TreadLife Fitness Powder Wax Wipe away any lubricants that get on the belt with a towel to avoid any accidents of slipping. Check that your lubrication gets all the way across by shining a flashlight. Wax Stick or Bar: Before applying this, you need to warm up the treadmill for about 15 to 20 minutes.

If you find that the track is still slippery, tighten up both sides of the back rollers. Test the functionality and confirm that there is no slipping on the track while running. Afterward, tighten up the belt and allow the treadmill to run at a low speed for some time to spread the lubricant evenly. Next, sprinkle some wax powder in between the belt and deck. Wax Powder: Loosen the treadmill belt by loosening the back roller.

#HORIZON TREADMILL LUBRICANT HOW TO#

As you have these two wax options, find out what suits you better and how to apply it. Older machines would need more wax than the newer treadmills. Some treadmill owners prefer this as it is easy to remove during cleaning before relubrication. After 3 minutes, get the treadmill to a comfortable walking speed and walk on it for another 3 minutes to spread the silicone.Ī.You can either use a wax powder or a wax stick to lubricate the belt of your treadmill.Run the treadmill for 3 minutes without walking on it.Stand on the running belt and walk so the other half of the belt is on the top.Press the syringe while moving the applicator towards the rear roller until all 10ml is applied. Insert the applicator under the running belt. Lift the running belt from the side in the front middle of the belt.Silicone applicator - Fill the applicator with 10ml of silicone.Procedure 2 – using or Silicone Applicator If you notice the belt not centered or tensioned properly, please go back to Step 5 Walk on the unit at a comfortable speed for 3 minutes to spread the silicone.Ī.Plug the power cord into the outlet and power on.

An additional 10ml could be added if needed but never use more than 30ml at one time.

Lift up on the belt as far as you can and apply the silicone in a zig-zag pattern across the entire running deck surface.

Using the t-handle wrench or socket, loosen the rear roller bolts until the running belt can be lifted enough to expose the center of the deck.

Power down the treadmill and unplug the power cord from the outlet.

Additional bottles can be purchased at (US) or (Canada).

20 ml silicone oil (The bottle contains 40 ml, which is enough for two applications.

Procedure 1 does not require you to loosen the belt and is the preferred method and requires fewer steps to perform. Although you can lubricate the deck/belt this way, it is important to make sure to re-tension and align the belt. This procedure requires you to loosen the running belt. Procedure 1 – using the bottle of silicone that comes with the treadmill A simple inspection of the deck and belt surfaces can be performed to identify if the deck/belt needs to be lubricated. This can change depending on many factors such as usage, age of the machine, and environmental conditions, among others. It is recommended to lubricate the deck every 150 miles (241 km) or every 3 months. Lack of lubrication causes friction and can lead to premature failure of the belt, deck, motor, or electronics. To ensure optimal long-term performance of your treadmill, the belt and deck must be lubricated periodically.

#HORIZON TREADMILL LUBRICANT FREE#

Waxed decks/belts are considered maintenance free meaning nothing should ever be applied/added to the deck or belt for its life.

#HORIZON TREADMILL LUBRICANT MANUAL#

IMPORTANT: Check the Owner’s Manual to see if your treadmill has a silicone running deck/belt or a waxed running deck/belt.

Horizon treadmill lubricant